Tag Archives: sump pumps

Plumbing and Sewer Line Pipes Installs

Plumbing problems can create considerable damage such as drywall , waterproofing , and pipes that need to tie into at the sewer lines. While some do-it-yourselfers enjoy the challenge of fixing even the toughest problems , many homeowner would rather leave the dirty work to a professional plumbing company. Before calling for help , you should know some basic plumbing concepts and problems.

Shutting off the water for winterize or emergency

Shutting the water is an important action to take in an emergency. Most homes have a main water shutoff valve located next to the water meter that can be used to stop water flow to the house . All family members should know the valve’s location and how to use it . It should should also be periodically checked to ensure proper function. Most plumbers fixtures have individual shutoff valves located in their supply lines .

Plumbing Problems Common Issues

Drain cleaning. Depending on the cause and location of a clog, drain cleaning may or may not be effective. Additionally , because clogs in multiple places can contribute to the problem , successful clearing one problem spot might not solve all of your long-term plumbing problems.

Toilet clogs Toilet clogs can often be cleared with a toilet plunger . If, however , the clog is too difficult to remove with a plunger , plumbers can use special tools special tools called augers, or snakes. Snakes are long ,flexible spring-like tools that are inserted into the clogged drain and rotated to manually break break up the clog.

Grease clogs. Grease clogs may represent a more difficult problem . Grease clogs usually occur in the two-inch drain pipe connecting the kitchen sink to the main four inch drainpipe that handles toilet waste and leads to the sewer. Because the washing machine pump forces water into the same two-inch drainpipe , a grease clog is commonly misdiagnosed as as a clogged washing machine drain line. Because grease naturally sticks to the walls of drain lines, it is relatively difficult to remove.

in some cases , the most economical feasible alternative is to replace the two-inch drain line. However , because of the high cost of replacing the line, the first attempt at alleviating the problem is to use a plumber’s snake to punch a hole through the grease as possible . Because this repair cannot remove all the grease as possible. Because the repair cannot remove all the grease , in time drain repeatedly re-clogs . If the same drain repeatedly clogs, you may need to replace the line.

Clogs in the main main sewer line .
Broken seal, joints , or pipe sections are the primary causes of most sewer line clogs . These breaks allow tree roots to penetrate and grow in the line, gradually blocking the flow of water and waste. The only way to remove all the roots from the line is to replace it, which is very expensive . In many cases, enough of the roots can be cut from the inside of the line with a sewer machine to open up the flow . Unfortunately because damaged roots an grow back in a fertile environment the line often ends up re-clogging . Furthermore , because some partially cut roots tend to shift position over time , the line may re-clog quickly.

Water Heaters , Frost Proof Outside Spigots, Tankless Water heaters ,

Drain Plumbing Water Damage Clean up Sewage Back up Problems

Drain problems causation and trouble shooting

What could cause gurgling in a rarely used wet-bar sink when water drains in the kitchen at one end of the house or in a bath at the other end? Chances are that the wet bar isn t vented or that its vent stack is blocked. You could check by looking for a plumbing vent pipe protruding through the roof above the area. It will look like the ones above kitchen and bath.

Sluggish drainage is one symptom of this problem. Sewer smell is another . When water drains in the kitchen or bath , it siphons water out of the wet bar s drain trap , which produces a gurgling noise. Without the seal provided by water in the drain trap , sewer gas can rise up through the sink and into the house .

If you don t use the wet-bar sink because of these problems , call a plumber to install an auto-vent. With this in place, the other drains won t siphon water out the trap. If you don t use it and don t really want it , have the plumber remove it and close the drain connection . In the meantime you can reduce the sewer gas smell by periodically pouring some water in the wet bar drain to keep the trap full.

Big Backups

Even with vapor venting, trap placement , and pipe sizing , drains still may be slow. This indicates a big blockage farther down the line. The best indicator that a blockage is in the waste line is sewage gurgling up through floor drains and basement fixtures. Solving this problem depends on your septic system type.

If you have a septic system with a leach field , your septic tank may need to be pumped out . This is a job for professional, but it s important to be around when the pumping concludes . Ask the pump operator if the tank was filled with enough greasy scum to cause the drain problems. If not , the pipes in the leach field itself may be the problem . Digging them up may be the only solution .

If your tied into a municipal sewage system , check to see whether any work has been done on your branch line lately . If so , it could have caused problems with your drainage , If not, tree roots may have gotten in the pipes . Hire a professional to auger the line and pull out the tree roots; thereafter , flush copper sulfate root treatment through the line twice year .

Do it yourself

There is snaking the kitchen line , clean out the pop up drain plugs hair clogged.. To access the trip waste linkage above the drain tub. If you cant get your toilet unclogged may have to remove the toilet snake it apply a new wax ring and reset it . Don t understand that process let a plumber handle it is just cheaper and safer, good luck.